Please choose a tester to review:
Model CA Model J
Model C Model HAH
Model LC Model HA
Model AH Model HJ
Model A Model AD

The Mullen CA Burst Tester is equipped with an air-powered clamp and motorized drive. The CA Model provides pressure readings up to 200 PSI and is designed for testing paper, plastics, textiles, and non-wovens.


Model C Product Data Sheet

The Mullen C Burst Tester is engineered to gauge pressure readings up to 200 PSI for testing paper, plastics, textiles, and non-wovens. Its motorized drive ensures constant pressure and its hand lever clamp delivers quick, effortless testing.


The Mullen LC Burst Tester is engineered to gauge pressure readings up to 200 PSI for testing paper, plastics, textiles, and non-wovens. Its hand wheel drive is suitable for occasional testing or when a low-cost portable unit is desired.

Please Note: This tester is NOT electric. It is Hand-Operated.


The Mullen AH Burst Tester provides pressure readings up to 1500 PSI and is designed for testing corrugated, linerboard, and heavyweight textiles. The hydraulic-powered clamp is particularly adaptable to corrugated board, which must be clamped with moderation to prevent crushing the flutes. The hydraulic pressure may be easily adjusted to the exact pressure desired. Rapid testing is then possible with assured uniform clamping pressure.


The Mullen A Burst Tester provides pressure readings up to 1500 PSI and is designed for testing corrugated, linerboard, and heavyweight textiles. Its powerful motorized drive ensures constant force to the select sample and its hand screw clamp allows virtually infinite clamping pressure for hard-to-hold materials.


The Mullen J Burst Tester is designed for testing corrugated and linerboard and is suitable for occasional testing or where a low-cost portable unit is desired. Its hand wheel drive is suited for sample tests of shipping containers and should be limited to materials below 500 PSI.

Please Note: This tester is NOT electric. It is Hand-Operated.


The Mullen HAH Hydrostatic Tester measures the resistance to water penetration under pressure and provides pressure readings up to 1500 PSI. It is equipped with a motorized drive for constant, controlled force and a hydraulic-powered clamp for assured uniform clamping pressure.


The Mullen HA Hydrostatic Tester measures the resistance to water penetration under pressure and provides pressure readings up to 1500 PSI. It is equipped with a powerful motorized drive to ensure constant force to the select sample and a hand screw clamp to allow virtually infinite clamping pressure for hard-to-hold materials.


The Mullen HJ Hydrostatic Tester measures the resistance to water penetration under pressure and provides pressure readings up to 500 PSI. Its hand wheel drive is suitable for occasional testing or where a low-cost portable unit is desired.

Please Note: This tester is NOT electric. It is Hand-Operated.


The Mullen Deflectometer Tester measures the distension and grain cracking of leather for such items as shoe uppers, gloves, garments, and upholstery. The Deflectometer Tester is equipped with a hand screw clamp and customized gears for a controlled reduction of force to approximately 15 +/- 5 MI/Min.


Test Standards
Find Your Tester

939 Chicopee Street, Chicopee, MA 01013-2797 • Tel (413) 536-1311 • Fax (413) 536-1367 • info@mullentesters.com

© 2015 Standex International Corporation. Your access and use of this site constitutes unconditional acceptance of the terms of our Web Site Use Agreement.